Water is introduced in the car's radiator that circulates in the engine's cooling system and gets hot. The radiator helps in eliminating the heat of hot water. It is necessary to flush the deposits and debris from the radiator of the car to prevent leaks and blockages. If not done at proper time the leaks caused by it can harm the cooling system of the car leading to a breakdown. Also it can help you save the money, which you have to possibly spend on engine repairs in case of overheating. It is important to keep your radiator clean during winter season. If the heating system is not maintained properly it can freeze up your car. You should not only diagnose the problem of your car but also perform the simple operations on it. The question arises in the mind “how to flush radiator of my car?” It is not that much technical that you need to see a mechanic to get your radiator flushed. No rocket science is required but a little guidance. Here are some simple tips on how to flush radiator.

Your car's radiator needs to be flushed every 5-6 months. It helps in reducing rust and particle accumulation inside the radiator. Some important points kept in mind before flushing the radiator include that you must park the car over a level surface.                Turn on the heater to heat up the engine. To prevent splashes from radiator cover the engine. Search the drain plug of the radiator and unscrew it. Let the old coolant flow out of the radiator. You can find drain plug at the bottom of the radiator. Upper and lower hose radiator should be detached. Replace the hoses if you find any of them faulty.

Check the color of the fluid that leaks from radiator. If there is rust in the radiator the color of the water will be brown. To clean the radiator put a running hose in the radiator. After few minutes when the dripping water is clear plug the radiator's bottom part with the hose. It will reverse the flush action. Repeating the process several times will clean the radiator completely. Fill the coolant liquid in the radiator and close the cap. Replace the cap if not in good condition. Run the engine for few minutes to check if there is any leak and seal the cap afterwards. It is the simple answer of how to flush radiator. Coolant liquid should be filled to the level that is recommended by the manufacturer.